Nothing comes close in size and simplicity! The m-Flash flasher unit substitutes all conventional flasher relays.

Dimensions: 
Casing (L x W x H): 18 mm x 13 mm x 9.5 mm 
Connector cable length: approx. 2 x 50 mm
Weight: approx. 4 g 

Attention: If you are looking for a flasher relay with automatic deactivation please refer to our m-Stop series! 

Notes
a) The m-Flash substitutes a conventional flasher relay. This flasher relay usually is implemented BEFORE the indicator switch.
The most convenient way to mount the m-Flash is to simply search and replace the original relay.

b) The m-Flash can NOT replace the push-button controls of a push-button instrument. Please refer to our m-Relay+ if you are looking for a flasher relay for push-buttons.

c) Newer Harley-Davidson model series use a special module to control the flasher controls (TSM/TSSM). These modules can NOT be replaced or complemented by the m-Flash.

All advantages summarized

• ultra compact and light - in essence just a piece of cable attached to a tiny, candy-sized device  
• ideal for custom bikes and mods with little mounting space - bulky conventional relays or load resistors are a thing of the past
• the wiring can be placed into the handle bar or frame tubes or into the wiring harness
• almost load independent (min. 1 Watt)
• completely implemented using digital semiconductor technology. microprocessor controlled No mechanical workings, no spools, no electric contacts
• consistantly constant and correct flasher frequency and suited for almost all LED turn signal lights, all micro and halogen turn signal lights as well as all 10-watts and 21-watts turn signal lights
• e. g. works with 4 turn signal lights or 2 handle bar end turn signal lights
• immediate loss free and brighter illumination of all turn signal lights
• utterly hassle-free connection using only two cables - just connect in series
• completely water tight and vibration resistant because of the moulded-in construction
• short circuit proof, automatic overload protection, switches power up to 100 W.
• no heat generation while operating
• only 5 - 18 V operating voltage required
• also applicable for 6 V turn signal lights
• quality 'made in Germany' - by motogadget