Home All Top Clamp Indicator Mod
Top Clamp Indicator Mod
Top Clamp Indicator Mod
Top Clamp Indicator Mod

Top Clamp Indicator Mod

$87.00 CAD

( / )
Unavailable

Please select all options.

Notify me when this product is available:

If you are purchasing a Cognito Moto Triple clamp and want us to incorporate indicators into the clamps. Mod include 5 LED's. We cut out the clamp on the front and back to incorporate these for a very clean look. Just add the clamp needed then add this item. Will come fully assembled. Perfect for running simple gauges that do not have indicator lights. 

 

Specs:

  • Can be incorporated into any of our Cognito Moto clamps
  • 5 Leds
    • Yellow
    • Green
    • Blue
    • Red
    • Yellow

INSTRUCTIONS

  • LED Wires:

    • Each LED has:
      • A positive wire (colored to match the LED light color).
      • A black wire (for ground).

  • Identifying Black Wires:

    • Use a battery to systematically test each colored wire by connecting it to the positive side of the battery.
    • Check each black wire individually to identify which LED it corresponds with through a process of elimination.

  • Yellow LEDs (Turn Signals) & Blue LED (High Beam):

    • Positive Wire (yellow for turn signals, blue for high beam) should connect to the respective turn signal or high beam circuit.
    • Black Wire connects to ground.

  • Red LED (Oil Light) & Green LED (Neutral Light):

    • Positive Wire (red for oil light, green for neutral light) should connect to a 12V source that is key-switched on (i.e., only powered when the ignition key is on).
    • Black Wire connects to the oil switch and neutral switch, respectively.
    • Note: These LEDs are ground-switched rather than 12V-switched (like the turn signals and high beam), so they activate when grounded.

 

Customer Reviews

Based on 1 review
0%
(0)
100%
(1)
0%
(0)
0%
(0)
0%
(0)
A
Atom Munz
Bright lights!

Fair price for integrated indicators. I did not notice the backing plate area when I added to cart. I interpret this as a locating feature which could be made much smaller, since the way the loom is routed, its an unused void in the yoke. And it uses space on the yoke which could be used for holes for risers.

Would have liked to see the plate have a junction for the lamp grounds, and then a single ground wire run from that junction point into the loom, instead of 5 ground wires as supplied.

Also, would highly recommend supplying the Right Turn indicator on yellow wire with a green tracer, just to mitigate the need to test the yellow wires.