Home Collections Gauges Triple Clamp with MotoGadget Motoscope Mini
Triple Clamp with MotoGadget Motoscope Mini
Triple Clamp with MotoGadget Motoscope Mini
Triple Clamp with MotoGadget Motoscope Mini
Triple Clamp with MotoGadget Motoscope Mini
Triple Clamp with MotoGadget Motoscope Mini - Cognito Moto
Triple Clamp with MotoGadget Motoscope Mini - Cognito Moto
Triple Clamp with MotoGadget Motoscope Mini - Cognito Moto
Triple Clamp with MotoGadget Motoscope Mini - Cognito Moto

Triple Clamp with MotoGadget Motoscope Mini

$603.97 USD

( / )
Unavailable

Please select all options.

Make and Model: CB350K 71-74
Finish: Bare Aluminum

Notify me when this product is available:

Product Details

Billet Aluminum Top Tree for your fork conversion. Clean up your front end with this quality CNC machined Top Tree. Integrated MotoGadget gauge and indicator lights.

The motoscope mini is an extremely small and lightweight multi functional instrument featuring an innovative display technology. All readings can be shown in a horizontal or vertical mode. The illumination intensity is adapted automatically. Compatible to almost all original speedometer sensors (3 wire and dry reed contact). Alternatively, an extra speedometer sensor is always contained in the scope of supply. Calibration of the speedometer is possible using an internal Teach Function.

Length 59 mm / Width 21.5 mm / Height 13 mm

Weight with cable approx. 32 gr.

Functions: Rev counter up to 20 k rpm shown as LED band or numerically, speed indication in km/h or miles, total odometer (adjustable), trip odometer, trip time, engine rev limiter warning.

 

Specs:

  • Made from 6061-T6 Aircraft grade aluminum.
  • Cognito Moto Design
  • Black Anodizing available for $20.00
  • Indicator lighting
    • Yellow = Turn
    • Red = Oil light
    • Blue = High beam
    • Green = neutral
    • Yellow = Turn

For the indicator lights 

  • LED Wires:

    • Each LED has:
      • A positive wire (colored to match the LED light color).
      • A black wire (for ground).

  • Identifying Black Wires:

    • Use a battery to systematically test each colored wire by connecting it to the positive side of the battery.
    • Check each black wire individually to identify which LED it corresponds with through a process of elimination.

  • Yellow LEDs (Turn Signals) & Blue LED (High Beam):

    • Positive Wire (yellow for turn signals, blue for high beam) should connect to the respective turn signal or high beam circuit.
    • Black Wire connects to ground.

  • Red LED (Oil Light) & Green LED (Neutral Light):

    • Positive Wire (red for oil light, green for neutral light) should connect to a 12V source that is key-switched on (i.e., only powered when the ignition key is on).
    • Black Wire connects to the oil switch and neutral switch, respectively.
    • Note: These LEDs are ground-switched rather than 12V-switched (like the turn signals and high beam), so they activate when grounded.