Triple Clamps | Handlebars | Controls
GSX-R Billet Top Tree for Fork Conversion 2006-2017 GSX-R600 & GSX-R750, 2005-2006 GSX-R1000
$142.99
GSX-R Billet Aluminum Top Tree for your fork conversion. Clean up your front end with this quality CNC machined Top Tree. This will replace the ugly factory GSX-R top tree...
GSX-R Billet Top Tree for Fork Conversion 28mm offset GSX-R1000 2007-2017
$142.99
GSX-R Billet Aluminum Top Tree for your fork conversion. Clean up your front end with this quality CNC machined Top Tree. This will replace the ugly factory GSX-R top tree...
Billet Top Triple Clamp CB500F, CB550F/K, CB750K 79-80 & CB750F 79
$142.99
Cognito Moto Designed Billet Aluminum Top Tree for your oem fork. Clean up your front end with this quality CNC machined Top Tree. New locking mechanism was used to eliminate slots and create...
Billet Top Triple Clamp CB450, CB500T & CB750K 69-76
$142.99
Cognito Moto Designed Billet Aluminum Top Tree for your oem fork. Clean up your front end with this quality CNC machined Top Tree. New locking mechanism was used to eliminate slots and create...
Billet Top Triple Clamp CB750F 75-78 & CB750K 77-78, CB750K 81-82, CB750A 77-78
$142.99
Cognito Moto Designed Billet Aluminum Top Tree for your oem fork. Clean up your front end with this quality CNC machined Top Tree. New locking mechanism was used to eliminate slots and create...
Billet Top Triple Clamp CB350K 72-74, CB360 74-76, CB350F 72-74 & CB400F 75-77 CL350 71-73
$142.99
Cognito Moto Designed Billet Aluminum Top Tree for your oem fork. Clean up your front end with this quality CNC machined Top Tree. New locking mechanism was used to eliminate slots and create...
Cognito Moto Retro Top Tree CB450, CB500T & CB750K (69-76)
$218.99
These are a Cognito Moto original design. CNC machined from 6061-T6 billet aluminum, then polished to remove any tooling marks. The clamping mechanism we incorporated allowed us to be more...
Retro Triple Top Tree For GSX-R Conversion
$263.99
Don't like the OEM GSXR Top Triple? Check out this Retro Top Triple.These are a Cognito Moto original design. CNC machined from 6061-T6 billet aluminum, then polished to remove any...
Cognito Moto Retro Top Tree CB750F (75-78) CB750K (77-78)
$218.99
These are a Cognito Moto original design. CNC machined from 6061-T6 billet aluminum, then polished to remove any tooling marks. The clamping mechanism we incorporated allowed us to be more...
Honda Style Push/Pull Throttle Assembly - Black
$22.00
We use these on our builds. Economical and reliable. Die-Cast aluminum housing with a nylon throttle tube for 7/8" handle bars. Can be used as pull only as well. Threaded...
Honda Style Push/Pull Throttle Assembly - Polished
$22.00
We use these on our builds. Economical and reliable. Die-Cast aluminum housing with a nylon throttle tube for 7/8" handle bars. Can be used as pull only as well. Threaded...
Clutch Lever Assembly w/Switch
$34.10
We use these on our builds and love them. Super simple and clean. Clutch Cable Adjuster 7/8" Bar Switch Universal Fit
Honda Style Push/Pull Throttle Assembly w/Cables - Black or Chrome
$48.00
Honda style, but very universal. Can be used on many applications including push/pull high performance Mikuni carburetors, and carburetor racks. Cables have an effective case length of 33" A push/pull...
7/8" Mirror Handlebar Mount
$7.00
7/8" Mount for mirror. Black Finish M10 Thread
Handlebar - Drag Bar Black
$26.00
Handlebar - Drag Bar Black Total Width 27.5" Rise None Pull Back 3.5" Dimpled No Bar Diameter 7/8" Steel Gloss Black Bar mounts pictured are not included
Handlebar - Daytona Touring Satin Black
$26.00
Handlebar - Daytona Touring Satin Black Total Width 29" Rise 4" Pull Back 6.5" Dimpled No Bar Diameter 7/8" Steel Gloss Black Bar mounts pictured are not included
Handlebar - LT OEM Replica Black
$24.00
Handlebar - LT OEM Replica Black Total Width 27.5" Rise 3.5" Pull Back 3.5" Center Width 5" Dimpled No Bar Diameter 7/8" Steel Gloss Black Powder Coated Bar mounts pictured...
Tarozzi Standard Clip-Ons (27mm-54mm)
$137.50
Tarozzi Clip-on Standard Handlebars Clean and simple design. Handlebar has slight angle that can be rotated around for comfort.
WoodCraft 3 Piece Split Clip-on Assembly 7/8" Bars (29-55mm)
$159.99
Woodcraft 3-piece split clipons are specially designed to make installation and removal a snap. Our 3-piece design is race proven and makes it easy to service your clipons below the...
Woodcraft Weighted Bar End Sliders
$49.95
Woodcraft Weighted Bar End Sliders fit all Woodcraft bars and bars with a 5/8'' inner diameter. Our puck mount is passed down from our patented frame sliders. The perpendicular mount...
Woodcraft Bar End Slider Set
$39.95
Woodcraft Bar End Sliders fit all Woodcraft bars and bars with a 5/8'' inner diameter. Our puck mount is passed down from our patented frame sliders. The perpendicular mount mount...
Custom Made Billet Triple Clamp (For Any Fork)
Sold Out
***CONTACT US BEFORE ORDERING TO BE SURE WE CAN MAKE IT*** Cognito Moto Designed Billet Aluminum Top Tree for your oem fork. Clean up your front end with this quality...
Honda CB750 / CB900 Clutch Cable - Black
$15.00
High quality replacement cable. Matches original equipment exactly for a perfect fit. Direct replacement OE quality, aftermarket part
CBR600RR 2005-2006 Billet Top Tree for Fork Conversion
$142.99
CBR600RR Billet Aluminum Top Tree for your fork conversion. Clean up your front end with this quality CNC machined Top Tree. This will replace the ugly factory CBR top tree...
Billet Top Triple Clamp CB650
$142.99
Cognito Moto Designed Billet Aluminum Top Tree for your oem fork. Clean up your front end with this quality CNC machined Top Tree. New locking mechanism was used to eliminate slots and create...
MotoGadget M-Grip
$158.00
The m-Grip is a universal handlebar grip made of aluminium to be used with typical handlebar tube diameters of 1 in or 22 mm (7/8 in).The intricately carved design is...
Honda Type Clutch Lever 2 Piece Perch - Black
Sold Out
Complete two piece lever bracket, comes complete with cable adjuster, pinch bolts, and pivot bolt. Clutch Cable Adjuster 7/8" Bar
MotoGadget m-Grip Cap
$34.00
MotoGadget m-Grip Cap with Laser engraved logo of motogadget is the matching end cap for the m-Grip. If you are using the grips without the m-Blaze Cone, these caps gives a...
CBR600RR 2007-2017 Billet Top Tree for Fork Conversion
$142.99
CBR600RR Billet Aluminum Top Tree for your fork conversion. Clean up your front end with this quality CNC machined Top Tree. This will replace the ugly factory CBR top tree and...
GSX-R1000, GSX-R750, GSX-R600 Billet Top Tree 2000-2004
$142.99
GSX-R Billet Aluminum Top Tree for your fork conversion. Clean up your front end with this quality CNC machined Top Tree. This will replace the ugly factory GSX-R top tree...
Biltwell Thruster Grips - Light Grey
Sold Out
Construction: Injection-molded Krayton synthetic rubber Fitment: Each size number refers to the outside diameter of the bar end on the left side of your motorcycle. If you don’t know the...
Biltwell Thruster Grips - Chocolate
$19.95
Construction: Injection-molded Krayton synthetic rubber Fitment: Each size number refers to the outside diameter of the bar end on the left side of your motorcycle. If you don’t know the...
Biltwell Thruster Grips - Black
$19.95
Construction: Injection-molded Krayton synthetic rubber Fitment: Each size number refers to the outside diameter of the bar end on the left side of your motorcycle. If you don’t know the...